TECHNICAL SPECIFICATIONS
- three-phase AC brushless motor
- with external rotor
- recommended for the direct drive of the propeller
- coated magnets made on FeNdB basis
- winding impregnated with high-temperature epoxy resin
- dual ball bearing with long life grease
- high speed ball bearing
- heat treated shaft
- parts produced on CNC machines
- high quality MP JET gold 2,5 mm connectors
- it is possible to buy conversion set for reversing mounting
- in case of reverse mounting the motor is fastened by four rubber silent-blocks
The packet of electromotor contains: 3 pcs of connectors (typ F), 3 pcs of shrinking isolations.
Recommend ESC: three-phase, sensorless (with EMF detection version), suitable version 30A, 18A partially.
| Number of cells |
6-10
|
| RPM per Volt (Kv) |
1050
|
| Maximum recommend speed (min-1) |
12000
|
| Maximum speed (min-1) |
14000
|
| Maximum efficiency (%) |
approx. 81
|
| Current for maximum efficiency (A) |
7-20
|
| Short time current (A) |
25
|
| Internal resistance Ri ; (mW - miliohm) |
81
|
| Dimensions - diameter/length (mm) |
36,5/35
|
| Shaft diameter (mm) |
5
|
| Number of turns |
13
|
| Weight of electromotor (g) |
94
|
| Recommend propeller range |
APC 8/4 -12/8
|
| Maximum weight of glider (g) |
1000
|
| Maximum weight of acrobatic model (g) |
750 |
