Hollow core moulded wings with special bottom hinged flaps (for full 90 deg. down flaps) leads to stable approach and accurate landings. The MH-32 Airfoil has a very wide speed range, it's full potential can be obtained when using full flap control over the different flight configuration: a couple of degrees down in thermal turns, a degree reflex in transition. Small changes in camber have substantial changes in behaviour letting you take all the advantages of the current thermal situation. Other particularity are the removable full flying moulded stabs, removable nose cone to ease access for the battery change.
The versatility and it's ease of use will allow aggressive competition flying as well as everyday smooth thermalling.
Kit content: Colored strong Kevlar/carbon fuselage, removable nose cone and moulded servo tray. Elevator and rudder carbon pushrods are installed. Hollow core moulded wings are in three pieces. Center panel bolts down to the fuse and tips are connected to the center panel by means of rectangular carbon wing joiner and two locating pins. All moving parts are gapless hinged. Moulded servo cover, Allen keys for the different bolts and hardware are included.
This design was created particularly for the US TD contests, a real landing machine, light and stable. Similar in all aspect to the Xtreme version except it features a fuselage with a special Kevlar/carbon lay-up, to save maximum of weight. The wings feature a hollow carbon spar, very stiff yet very light and with a light wing skin of glass/balsa or Rohacell(Herex)/glass, the wings remain stiff and strong for tuff landings.
Following options and accessories are also available:
Power package on 7 cells (FAI/LMR):
Power package on 10 cells (high performance LMR):
Power package on 12 cells: