The spinner series for aerodynamic top performance.
The Z spinners combine the advantages of the CN spinner (cool nose with cooling air openings) and the Z shaped center pieces. Due
to the angled middle pieces made of aluminum, the folding propeller
blades fit even closer to the fuselage and thus ensure less air drag during gliding. The
spinners with the middle pieces are designed for slim e-glider fuselages,
but can also bring advantages, for example, with wooden box style construction, if these are rounded.
middle pieces of the spinner sizes 38, 40 and 42mm are interchangeable,
for example 38mm spinner caps can be operated with the middle piece of
the 42mm spinner. These
combination options result in further optimization potential, as this
enables a finer adjustment to the respective fuselage. The 30mm spinner has its own center piece that cannot be combined with the other spinner caps.
Z-Spinner contains a spinner cap (diameter 30mm) made of white plastic
(very easy to paint), a milled aluminum center piece with an integrated
holder for the clamping cone, special prop rubber for folding the
propeller blades, mounting screws for the spinner cap and propeller
The diameter of the spinner cap is 30 mm. The center distance (d) for this spinner is 25 mm. This means that the diameter of the propeller blades will decrease by 16 mm (0.67"). Example:
A propeller with a 12" diameter effectively has a diameter of 11.33"
at this center section (the size specifications for folding propellers
always refer to the use of a center section with a center distance d =
The following, suitable collets are required for this spinner series:
Clamping cone motor shaft 2.0mm - Order No. 7123/00 clamping cone motor shaft 2.3mm - order no. 7123/01 Clamping cone motor shaft 3.0mm - Order No. 7123/02 clamping cone motor shaft 3.2mm - order no. 7123/03 Clamping cone motor shaft 4.0mm - Order No. 7123/04 Clamping cone motor shaft 5.0mm - Order No. 7123/05 Clamping cone motor shaft 6.0mm - Order No. 7123/06
The spinner caps are available individually in all sizes as spare parts:
Spinner cap 30mm - Order No. 7251/81 Spinner cap 38mm - Order No. 7251/84 Spinner cap 40mm - Order No. 7251/85 Spinner cap 42mm - Order No. 7251/86
The prop rubber for this spinner is available individually as a spare part under item number 7251/65.